Medical protective mask (N95 mask) 1 pc/ bag
Instructions for medical use protective mask
Product name: Medical use protective mask
Specifications and models: Folding shape and bind belt type
Product registration certificate No.: 20202140011
Product technical requirement No.: 20202140011
Production Permit No.: 20200004
Name of registrant / manufacturer: Xi’an Livingbond Non-woven Products Co,. Ltd
Production address: Feng Jing Industrial Zone, Xi’an City, Shaanxi Province, P.R.CHINA
Phone number: 029-88258138
After-sales service company: Xi’an Livingbond Non-woven Products Co,. Ltd
After-sales service Phone number: 029-88258138
Product performance and structure composition: The product is heat combined by the special spunbonded non-woven material (inside and outside) of medical protective mask and ultra-fine polypropylene filter cloth (interlayer), which is composed of spunbonded non-woven fabric, ultra-fine polypropylene cloth, headband and nose clip.
Range of application: It is suitable to be worn on the face of people in contact with virus materials in medical institutions to prevent the transmission of virus from patients to medical staff.
Contraindication: Nothing.
Wearing way:
-
Open the outer package and tear open the mouth of the bag;
-
Stretch and unroll the mask with the nose clip on top of the mask, the side without the clip facing to face;
-
Hold the lower end of the mask against the chin, pull the below band over the top of the head and place it under the ears behind the neck to adjust the tightness; Pull the top band over the top of your head and place it above your ears. Adjust the tightness;
-
Place the fingers of both hands in the middle of the metal nose clip and press from the middle to the sides according to the shape of the bridge of the nose until it is pressed into the shape of the bridge of the nose.
Matters need attention:
-
Check whether the package is in good condition before use, and do not use if the package is damaged;
-
The product is treated as medical waste after use;
-
Please use this product within the validity period;
-
Not recommended to use if poor breathing or sleeping;
-
Please read this instruction before use.
Storage conditions and methods: Store at room temperature to avoid sun and rain.
Date of manufacture: find at the certificate of approval.
Validity: 2 years.
This product conforms to GB 19083-2010《medical protective mask technical requirements》
Instructions revision time: February 11, 2020
The product is sterilized with ethylene oxide and is supplied in sterile form.
